1
WIRELESS ENG / EFP SYSTEM
Quick start
Step. 1
Insert 2 supplied AA batteries into receiver, transmitter and microphone.
Step. 2
Step. 3
Press and hold the power button for 1 second to turn receiver, transmitter
or microphone on.
Receiver:
1.
Press and hold the set button for 1 second until backlit screen turns to
white and channel number A flashes.
2.
Press
or
button to select preferred channel A and press the set
button to confirm.
3.
Channel number B will start to flash after above selection of channel A is
done.
4.
Press
or
button to select preferred channel B and then press the set
button to confirm.
5.
The receiver will be back to home screen after above selection of 2
channels are completed.
