Okayo OMG-100T Plus, User Manual

17

6

O

OMG-100T can't hear his own voice.

OMG-100R can't hear OMG-100T

Device Installation

C

Trouble Shooting

 Make sure the headphone and the microphone are plugged correctly in the player.
Make sure TALK mode is set preferably.
If above solutions can't solve the problem, return the player to your supplier.

Make sure selected channel on both OMG-100T and OMG-100R is same.
Make sure OMG-100R is in the operation range of OMG-100T.
 Interference might potentially happen. Being away from other tours and return to yours.
If above solutions can't solve the problem, return the player to your supplier.

There is no track in the folder.

The track does not exist.

An error happens to SD card in the player. Restart the player or press reset key       on the 
back side.
If this error still exists, return the player to your supplier.

The wireless communication fails if “- -“ shows up. Return the player to your supplier.

The battery is running low. Return the player to the counter for recharging immediately.

Alarm will also be activated when this screen shows up. Return the player to the counter for 
alarm release.
To mute the player temporarily (alarm screen is still on), press both      and        buttons 
simultaneously.

Alarm can be released via 

Loop Controller LT-200+

 or chargers/uploaders.

OMG-100T       l  OMG-100R

To charge the player via an uploading cable directly, press # button after it's been connected 
with PC. When symbol       shows up on the screen, the player is being charged now.