Okayo OMG-100T Plus, User Manual

6

O

Device Installation

C

Power On

1. Press the

button for 1 second to turn the player on.

2. If              shows up, press both      and        buttons simultaneously for 1 second to turn the 

player on.

Guided audio tour
The group guide can not only talk to but also send
track content to group members.

OMG-100T 

(group guide)

OMG-100R

Mode

(group member)

Guide

Listen

+

Turn On

Players are with inbuilt battery and make sure their batteries are fully charged before being 
operated.

Device Installation

Change Your Mode to Guide (OMG-100T)

Change Your Mode to Listen (OMG-100R)

1. Press both 

#

 and      buttons* simultaneously for 1 second to turn the player on when      

OMG-100T is off.

2.  Default mode

 Live

 shows up. Press the        or        button to change your mode to 

Guide

. 

3. Press the        button to confirm (underline) the selection and leave the setting. OMG-100T 

will be off again.

1. Press both 

#

 and      buttons* simultaneously for 1 second to turn the player on when      

OMG-100R is off.

2.  Default mode

 Listen

 shows up. Press the        or        button to change your mode to 

Listen

. 

3. Press the        button to confirm (underline) the selection and leave the setting. OMG-100R

will be off again.

*If OMG-100T was turned off by pressing both

and

buttons simultaneously earlier, 

#

,

and

buttons 

  should be pressed at the same time at this step.

*If OMG-100R was turned off by pressing both

and

buttons simultaneously earlier, 

#

,

and

buttons 

  should be pressed at the same time at this step.

Assign Your Group Channel

1.  Turn OMG-100T and OMG-100R on.
2.  Type in 

#

 and then press the        button on both OMG-100T and OMG-100R.

3.  Last selected channel number flashes slowly on OMG-100T whereas it flashes quickly on 
     OMG-100R.
4.  Press the        or        button to select a new channel on OMG-100T, if necessary. No channel 
     adjustment is available on OMG-100R at this step.
5.  Press the        button to confirm new channel, which starts to flash quickly on OMG-100T.
6.  OMG-100T is now sending signal of new-channel assignment to OMG-100R.
7.  When OMG-100R receives new-channel assignment, new channel number shows up and 
     stops flashing. OMG-100R leaves the setting afterwards.

OMG-100T       l  OMG-100R