|
User’s Guide: English
55
In this mode, your machine detects whether an incoming call
is a fax or voice call. If it is a fax call, your machine receives
the fax. If it is a voice call, your machine rings, then your
answering machine activates. If you set the Remote Receive
user function, the caller can send a fax at any time during or
after the recorded message by using their keypad to enter the
remote receive number you have programmed. This number
activates fax reception. Add something like this to your
answering machine message: “To send a fax now, press XX
[the programmed number].”
See “Setting Basic Features, Dial and Incoming Call
Parameter Settings, Incoming Call Parameters.”
Memory Reception Mode [MEM]
Received data is not printed but is stored into memory, even
if there is fax paper on which to print.
Use the Print Operation function to print out data stored in
memory during Memory Reception mode. You can set a
password (USER PROGRAMMING under MEM.
PASSWORD PRG) to disable the Memory Reception mode.
Forwarding Mode [FWD]
All fax communications are received into memory, then
forwarded to another telephone number.
When set to this mode, the machine receives all fax
communications into memory, and then automatically sends
the messages to the telephone number programmed into the
Call Forwarding function. This function displays only when
a forwarding number has been programmed.
PC Fax Mode [PC]
!
This mode is available only if an optional MFP Kit is
installed.
Incoming faxes are stored on you computer’s hard disk
instead of printing immediately.
This mode is only available when the machine is connected
to a personal computer via optional multifunction product
(MFP) software. When activated, the machine forwards the
call directly to the computer. This lets you work with faxes
on your computer using the software included with the MFP
option.
