UNIX 89
AIX 4.1.5 configuration
The following explanation uses AIX4.1.5 and a C5300 printer as examples.
The absolute path of commands and the method of configuring may differ
with the OS version. Refer to the workstation’s manual. If an incorrect IP
address is entered, the network may go down or other damage may occur.
Configure after consulting the network manager.
1.
Log in as [root]. If you do not have superuser rights, the network
manager should conduct the configuration.
2.
Register the IP address and the host name in the
/etc/hosts
file.
Example: for IP Address 192.168.29.127 and host name C5300
192.168.20.127 C5300
3.
Use the
ping
command to confirm connection with the network card.
Example: for host name C5300
# ping C5300
If there is no reply, there is a problem with the configuration of the IP
address (the IP address has already been set manually or dynamically), or
with the network. Reset the network interface card settings to default and
try to set a temporary IP address. If you still have the problem after
resetting the network interface card, consult the network manager.
4.
Register the host that was previously registered as the print server.
Example: for the C5300 registered as the print server
a. Add the print server.
# ruser –a –p C5300
b. Activate the remote printer daemon.
# startsrc –s lpd
# mkitab ‘lpd:2:once:startsrc –s lpd’
5.
Add the print queue using the
smit
command.
a. Activate the
smit
command and convert to the item [Add print
queue].
Summary of Contents for 8100e
