background image

OkiLAN 8300e Network User’s Guide, C6000n and C6100 Series

UNIX - 107

# chown –R daemon /usr/spool/PRINTER_lp

# chgrp –R # daemon /usr/spool/PRINTER_lp

6. Check that lpd (printer daemon) is activated.

# ps aux | grep lpd

7. If lpd is not running,start it by logging in as superuser and 

executing

# /usr/lib/lpd &

Sun Solaris 2.x configuration

Admintool is normally used to register remote printers on Open 

Windows. However, it cannot be used here, as the data recipient 

and queue have the same name. The procedure below must be 

used for registering a remote printer.

If Solaris 2.x is connected to the remote printer for a long period 

according to the system specifications, errors and forced 

disconnection may occur. Therefore, if paper tearing, off-line and 

other errors result in waiting time, printing may have to be 

aborted.

If an incorrect IP address is entered, the network may go down or 

other damage may occur. Configure after consulting the network 

manager.

The following explanation uses Sun Solaris 2.8 (known as Solaris 

8) and an OKI printer as examples.  The absolute path and method 

of configuring commands may differ in other versions of the OS.  

Refer to the workstation manual for more details.

1. Confirm that the IP address of the printer has been set.

2. Log in as [root] to the workstation. If you do not have 

superuser rights, the network manager should conduct the 

configuration.

Summary of Contents for 8300E C6000N


































































































































Reviews: