Configuration 36
Delete NetWare Object
By selecting this item, you can delete a NetWare queue/print server/
printer from NetWare server by AdminManager.
>
NetWare Client 32 or IntranetWare Client should be loaded on to
the PC on which the AdminManager runs. Also, the client package
should be configured to access NetWare NDS network or bindery
network. You should login to NetWare servers as a user who can
delete objects on the servers.
1.
Select [Delete NetWare Object] from [Setup] menu.
2.
Select an object you want to delete and click [Delete] button.
3.
To exit from this dialogue box, select [Quit].
IP Address Setup
If you only use TCP/IP and the OkiLAN has not yet been configured,
occasionally it may not be displayed on AdminManager. You can
configure the IP address of the OkiLAN by this function.
1.
Select [IP Address Setup] from the [Setup] menu.
2.
Set [Ethernet Address] and [IP Address] and select [OK].
>
The Ethernet Address (MAC address) is displayed during the self-
diagnostic test.
3.
AdminManager asks whether you want to initialise the network
interface card or not. Select [Yes]. Even if you select [No] here, the
IP address that you set can be used after turning the printer OFF and
ON. The requirement to turn your printer OFF and ON is dependent
on the network interface card.
Summary of Contents for B4300
