4 - English
Ensure the power cable is routed so as not to be damaged or cause a
trip hazard. If the cable becomes frayed or damaged replace it
immediately to prevent any risk of shock.
Do not twist, constrict or knot the power cable as this can cause
overheating which may lead to fire or electric shock.
Ensure the power socket to which the product is connected is easily
accessible at all times and not obstructed.
Use only the power cable supplied. Using a power cable not intended
for this product may lead to fire or electric shock.
To avoid risk of fire and electric shock, do not use the power cable
supplied with this product for any other electrical equipment.
If you do not connect the power cord or any other cables only as
directed in the User's Guide, this may result in a fire.
It is recommended that the machine is switched off prior to opening
covers; otherwise there is a risk of electric shock.
When the product cover is open, do not touch the fuser unit or print
head as you may receive burns. Allow it to cool before touching.
If the product casing gets extremely hot or smoke, unusual smells or
abnormal noises are emitted from the product, there is a risk of fire.
Unplug the mains connector and contact your dealer.
If the product has been knocked over or damaged, there is a risk of
electric shock, fire and/or injury. Unplug the mains connector and
contact your dealer.
If any liquid (for example water) is allowed to enter the product,
there is a risk of fire. Unplug the mains connector and contact your
dealer.
Do not place containers containing liquid on the product as electric
shock, fire and/or injuries may occur.
If any foreign objects (for example clips) are allowed to enter the
product, there is a risk of electric shock, fire and/or injury. Unplug
the mains connector before removing the object.
Do not introduce foreign objects into the ventilation holes or operate
this product with any covers open or doors removed as electric shock,
fire and/or injuries may occur.
Do not use an extremely flammable spray near the product as the
product contains high temperature parts that may cause a fire.
Switch the product off before cleaning to prevent any risk of injury.
Clean using a damp cloth. Do not use liquid or aerosol cleaners.
Ensure loose clothing and hair is kept clear of moving parts when the
product is in operation to prevent possible risk of injury.
Do not carry out any operations on the product that are not specified
in the User's Guide. This may result in electric shock, fire and/or
injury.
Do not touch the battery if one is fitted to the product. There is a risk
of explosion if the battery is replaced by an incorrect type. The
product battery should not require replacement during the life of the
product.
Do not throw toner cartridges or image drum cartridges into a fire as
you may receive burns from a dust explosion.
After installing additional memory, hard disk drive, or any other
internally fitted option, any covers removed or doors opened must
be closed or replaced and secured to prevent risk of fire.
The acoustic noise of this product is less than 70 dB (A) as measured
in accordance with EN ISO 7779.
The operating condition range for your product is: 10 to 32°C and 20
to 80% RH. Operation of the product outside this range could result
in damage to the product.
If a scanner, finisher etc. is fitted, exercise care when moving these
items so as to avoid risk of entrapment or personal injury.
If the product is installed on a cabinet or high capacity feeder, ensure
wheel locks are applied once placed in final position for use, to
prevent risk of movement or injury.
English
Limited Warranty, US and Canada
U.S. and Canada only
Oki Data Americas, Inc. (Oki Data) warrants this B4400/
4600 (hereinafter "the Product") to be free from defects in
material and workmanship and will remedy any such
defect according to, the terms of this
Limited Warranty
.
Oki Data will repair or at its option, replace, with the same
or its functional equivalent, at no charge, any defective
component(s) of the Product for one (1) year from the
date of purchase except for the printhead (LED imaging
array), which is warranted for a period of five (5) years
from the date of purchase.
This
Limited Warranty
only extends to the original
purchaser of the warranted item. This
Limited Warranty
is
not transferable. This
Limited Warranty
does not extend to
consumable items or supplies, such as toner cartridges,
image drums, ribbon cartridges, fuses, etc.
Overnight Exchange
US and Canada Only
Oki Data offers Overnight Exchange of the Product
under this
Limited Warranty
. Overnight Exchange is
only available in the United States and Canada and
it does not include the replacement or repair of the
Product's consumable items or supplies.
If you choose to use our Overnight Exchange
service, call 1-800-654-3282 (1-800-OKI-DATA):
our trained personnel will try to solve your problem
over the phone. If they determine that your Product
hardware is defective, an exchange product will be
shipped to you via overnight carrier. Have your
credit card available as our representative will be
asking for this information. You will receive the
exchange product the next business day—or no
later than the second business day.
Return the original Product to Oki Data by using the
same packaging materials you received with the
exchange product. The Product to be returned must
be made available for pickup by Oki Data's
representative within two (2) business days of your
receipt of the exchange product: failure to do so
may result in your being charged the full price of
the exchange unit.
Before you ship the Product, remove the image
drums and toner cartridges to prevent damage to
the Product during shipment: failure to do so may
result in your credit card being charged for cleaning
and/or repairs to the Product.
When Overnight Exchange is used, the returned
machine becomes the property of Oki Data, once it
has been picked up by Oki Data or its
representative. Exchange machines may be new or
reconditioned, at the option of Oki Data: the
exchange machine becomes the property of the
customer when the returned machine has been
picked up by Oki Data's designated carrier.
