Configuring UNIX Printing Software on a LINUX System
UNIX Printing Software Administration and Installation Guide
8/25/02
4-65
3. Enter a name for the filter. Press
RETURN
.
If the filter name already exists, you will be prompted to overwrite it. If the filter
name does not already exist, the following prompt appears:
Enter the name of the printer:
4. Enter the name of the printer. Press
RETURN
.
The following prompt appears:
Enter the port of the print server.
5. Enter a port number for the print server. Press
RETURN
.
Example:
6869
Note:
This is the socket number that sdriver will use for connecting to the
printer.
The following prompt appears:
Debug Mode [no, n, yes, y]:
6. Enter
y
to activate the debug mode for the socket driver. Press
RETURN
.
The following prompt appears:
Log Mode [no, n, yes, y]:
7. Enter
y
to activate the log mode. Press
RETURN
.
The following prompt appears:
Enter the pathname of the log file:
8. Enter a pathname for the log file:
Example:
# /home/adv/40test
The following prompt appears:
Filter Filter_Name has been created.
