B710 B720 B730 User’s Guide > 107
Error Messages (alphabetical order)
Message
Condition/Reason/Action
Bad Action
Format error.
Bad Action Str
Missing or bad action defined for job.
Bad BUFSIZE Cmd
Format error on BUFSIZE command.
Bad COLUMN Cmd
Format error on COLUMN command.
Bad FEntry CMD
Unrecognized Form Entry command.
Bad FORMLINES
Format error on FORMLINES command.
Bad Header Cmd
Unrecognized Header command.
Bad LINE Cmd
Format error on LINE command.
Bad PAGE Cmd
Format error on PAGE command.
Bad PORT Cmd
Format error on PORT command.
Bad Target Str
TARGET string format error.
Bad TEntry CMD
Unrecognized Target Entry command.
Call Service
Help message used for service-type errors.
Cancel Job
Confirmation prompt used when CANCEL is
pressed.
Canceling Job
An operator-requested Cancel is in progress.
Clock Not Set
Real Time Clock has not been initialized.
Close Duplexer
Recovery message displayed when duplex door
is open.
Close Rear Cover
Recovery message displayed when rear cover is
open.
Close Top Cover
Recovery message displayed when top cover is
open.
Code FLASH Error
Defective Code Flash - user forced into Firmware
Upgrade.
Command Format
Bad command format.
Completed
Display for the files status.
Cover Open
Recovery action displayed when cover is open