background image

Duplex module — 65

DUPLEX MODULE

If a duplex module is installed, printing on to both sides of paper can be performed. Two types of duplex 
modules are available: duplex module/bypass tray and duplex module. The descriptions in this manual 
are for the duplex module/bypass tray.

Part names 

Exit tray

The tray is extendable to support large size paper.

Extend the tray when 11" x 17", 8½" x 14", 8½" x 13", A3 or B4 paper is being used.

Bypass tray

This tray can also be used for special papers including transparency film. 

• Automatic two-sided printing can only be done on plain paper.

Special papers cannot be used for two-sided printing. 

• Do not press down on the bypass tray or the exit tray. 

• The duplex module requires the installation of other peripheral devices in order to be functional and

cannot be installed together with some other devices. See the compatible specifications table.

Specifications

Name 

Duplex module or Duplex module/bypass tray

Paper size (for duplex copy)

1

11 x 17, 8½ x 14, 8½ x 13, 8½ x 11, 8½ x 11R, 5½ x 8½R, A3, B4, A4, A4R, B5, A5R 

Paper weight (for duplex copy)

1

 

60 to 105 g/m

2

 (or 16 to 28 lb)

Reference paper position 

Centre 

Bypass tray paper capacity

2

 

100 sheets (A4 or 8½" x 11" size, 80 g/m

2

 or 20 lb) 

Dimensions 

Duplex module: 115 mm (W) x 412 mm (D) x 416 mm (H); (4

17

/

32

" (W) x 16

15

/

64

" (D) x 16-25/

64

" (H))

Duplex module/bypass tray: 451 mm (W) x 439 mm (D) x 416 mm (H); (17

49

/

64

" (W) x 

17

19

/

64

" (D) x 16

25

/

64

" (H))

Weight 

Duplex module: approx. 5 kg (11.1 lb)
Duplex module/bypass tray: Approx. 7.5 kg (16.6 lb)

1

 For paper size and paper weight for the bypass tray, see 

Specifications of Paper Trays (Types and Sizes of Applicable Papers for Trays)

2

 Duplex module/bypass tray only. 

Name

Exit tray 

Paper output 

Print face down

Paper capacity

100 sheets (A4 or 8½" x 11" size, 80 g/m

2

 or 20 lb) 

Paper size

Max. A3 or 11" x 17", Min. or A5R or 5½" x 8½"R 

Paper type and weight to be output

Plain paper, 60 to 105 g/m

2

 (or 16 to 28 lb)

Specifications are subject to change without notice

Duplex module 

Exit tray

Bypass tray 

Summary of Contents for B8300
































































































Reviews: