79 — Saddle stitch finisher
SADDLE STITCH FINISHER
The saddle stitch finisher can automatically place two staples for centreline binding of prints and fold
them along the centreline. An optional hole punching unit is available for installation into the finisher.
Part names
●
Do not press on the saddle stitch finisher (particularly the offset tray).
●
Be aware that the offset tray moves up and down during printing. Take care not to obstruct the tray.
●
Check the correct configuration requirement for the installation of the saddle stitch finisher. Certain
configurations will not work.
Specifications
Name
Saddle stitch finisher
Number of trays
Two
Paper output
Print face down
Tray system
Upper tray: offset tray, Lower tray: saddle stitch tray
Tray capacity
Upper tray: Non-stapling: Max. 1,000 sheets for A4 or 8½
x
11 or smaller sizes (80 g/m
2
or 20
lb), max. 500 sheets for 8½
x
13 or B4 or larger sizes (80 g/m
2
or 20 lb) Stapling: Max. 30
stapled sets and max. 1,000 sheets for A4 or 8½
x
11 or smaller sizes (80 g/m
2
or 20 lb), max.
30 stapled sets and max. 500 sheets for 8½
x
13 or B4 or larger sizes (80 g/m
2
or 20 lb)
Lower tray: Stapled print capacity is (6-10) sheets x 10 sets or (1-5) sheets x 20 sets.
Paper size
Upper tray: 11
x
17, 8½
x
14, 8½
x
13, 8½
x
11, 8½
x
11R, 7¼
x
10½, 5½
x
8½R, A3, B4, A4,
A4R, B5, B5R, A5R Lower tray: max. 11
x
17, 8½
x
11R, A3, B4, A4R
Paper weight
Upper tray: 60 to 205 g/m
2
or 16 to 54 lb
Lower tray: 64 to 80 g/m
2
or 17 to 34 lb
Paper types
Upper tray: plain paper, thick paper
Lower tray: plain paper only
Tray full detection
Provided in both trays
Offset function
Upper tray only
Paper sizes for stapling
11"
x
17", 8½"
x
14", 8½"
x
13", 8½"
x
11", 8½"
x
11"R, A3, B4, A4, A4R, B5, and B5R
Lower tray:11"
x
17", 8½"
x
11"R, A3, B4, and A4R
Stapling capacity
A4 or 8½"
x
11" or smaller size: 50 sheets*(80 g/m
2
or 20 lb)
8½"
x
14" or B4 or larger size: 25 sheets*(80 g/m
2
or 20 lb)
*Up to two sheets of 128 g/m
2
or 34 lb paper can be included as covers
Staples
Upper tray: Single staple can be placed in the top left or lower left corners or two staples can be
centred on the left side
Lower tray: 120 mm (4
47
/
64
") pitch from the centre of paper
Power supply
Requires the installation of an optional power supply unit
Dimensions
718 mm (W)
x
603 mm (D)
x
1000 mm (H) (28
9
/
32
" (W)
x
23¾" (D)
x
39
3
/
8
" (H))
Weight
Approx. 39 kg (86 lb)
Name
Punch module
Number of holes/hole diameter
Three holes: 6.5 mm or
17
/
64
"
Specifications are subject to change without notice
Stapler compiler
Paper to be stapled
is stacked temporarily
Top cover
Open for misfeed removal
Offset tray
Output which is stapled
or offset will be
delivered to this tray
Stapler section
Open the front cover
and pull out this section
to replace the staple cartridge
or to remove jammed staples
Saddle stitch tray
Saddle stitched output
is delivered here
Front cover
Open the front cover and pull out this
section for staple cartridge replacement
or to remove jammed staples
Summary of Contents for B8300
