Paper recommendations > 29
P
OSTCARDS
The manufacturer of this printer recommends the following guidelines when selecting
postcards for use in your printer:
>
Always manually feed single postcards using the Multi Purpose Tray.
>
Use unfolded double postcards.
>
Use postcards designed for use in laser type printers.
>
Do not use postcards used for ink jet printers.
>
Do not use stamped or picture postcards.
I
NSTALLING
PAPER
P
APER
TRAY
1.
Remove the paper tray from the printer.
2.
Fan the paper to be loaded at the edges (1) and in the middle (2) to ensure that all
sheets are properly separated, then tap the edges of the stack on a flat surface to
make it flush again (3).
NOTE
If printing on A6 size paper, use the multi purpose tray.
NOTE
If you are topping up the paper in a paper tray, it is recommended that you
remove the remaining paper from the tray first then add the new paper stock
followed by the paper you removed. This ensures that the oldest paper is used
first to help prevent paper jams.
1
2
3
