Paper recommendations > 31
Face
up and face
down printing
For face down printing, make sure the Rear stacker is closed (the paper exits from the top
of the printer). The Output Stacker on the top of the printer stacks printed pages face down,
capacity 250 sheets of weight 80g/m². Pages printed in reading order (page 1 first) will be
sorted in reading order (last page on top, facing down).
The face up stacker should be opened and the tray extension pulled out when required for
use. (With the face up stacker either opened or closed, the driver setting of face down will
successfully direct prints to the face down stacker.)
The face up stacker can hold up to 100 sheets 80g/m² standard paper.
Always use this stacker in conjunction with the Multi Purpose Tray or for heavyweight
stocks to reduce the possibility of paper jams.
See “Paper and tray information” on page 77.
Automatic feed sequence
With no optional feed trays installed, the Autotray function in the Print Menu is set by
default to ON
and the Tray sequence function is set to DOWN. In this way, if a tray runs
out of paper, automatic feed will take place in the order Tray 1, Tray 2 (if fitted), Tray 3 (if
fitted), Multi Purpose Tray, provided that these trays are set up for identical media. Also,
configure the media size and media weight for the respective trays in the operator panel.
M
ULTI
PURPOSE
TRAY
1.
Pull down the Multi Purpose Tray (1), extend the tray (2) and fold out the paper
supports (3), and adjust the paper guides to the width of the paper (4).
2.
Load the paper into the Multi Purpose Tray and push the set button (5). Ensure that
the paper is loaded below the arrow level (6) to avoid paper jam.
>
For single-sided printing on headed paper load the paper with the pre-printed side
up and top edge into the printer.
>
For two-sided (duplex) printing on headed paper, load the paper with the pre-
printed side down and top edge away from the printer.
NOTE
Do not exceed the paper capacity of approximately 100 sheets or 10
envelopes depending on the media weight.
2
3
1
5
4
6
