On-line Commands – LAN Interface
BV1250 Technical Reference
Page 146
Rev. 1.0
Item 8-9:
UPLINK
(
SET
and
GET)
CLASS
LAN Interface command
FUNCTION
Command to set and get Uplink parameters for BS1200 unit. Parameters configure network timing used
when monitoring link between a Gateway and a router, hub or switching device to which unit is
connected. When link failure is detected, the error condition is reported.
CHARACTERISTICS
SET-UPLINK
Writes Uplink parameters to BS1200 unit
Input Parameter(s):
P1 - Timing period in seconds, over which the error checking packets will be transmitted during
normal operation.
P2 - Error Detect period in seconds, over which the error checking packets will be transmitted after
an error has been detected. This value is usually set to a higher frequency than Regular
Timing.
P3 - Number of times that an error can be detected before the link is failed (disconnected)
P4 - Reconnect on Errors is number of times that a recovered link is to be detected before the link
will be reestablished as normal and Regular timing (P1) is restarted.
Output Parameter(s):
Displays current (ACT) and new (SBY) parameters for uplink
GET-UPLINK
Returns current uplink parameters
Input Parameter(s):
None
Output Parameter(s):
Displays current (ACT) and new (SBY) parameters for uplink
ACCESS
SET-UPLINK:
RS-232C and LAN
GET-UPLINK:
RS-232C and LAN
EXAMPLE(S)
SET-UPLINK nn nn nn nn
#SET-UPLINK 0 3 10 1
ACT Time_Period Error_Detect no_response_max Successful=0,3,10,1
SBY Time_Period Error_Detect no_response_max Successful=0,3,10,1
...SET-UPLINK Command End. [TUE May 25 13:06:09 1999 GW]
#
GET-UPLINK
#GET-UPLINK
ACT Time_Period Error_Detect no_response_max Successful=0,3,10,1
SBY Time_Period Error_Detect no_response_max Successful=0,3,10,1
...GET-UPLINK Command End. [MON May 24 08:15:24 1999 GW]
#
Summary of Contents for BV1250
