Oki Data CONFIDENTIAL
43163501TH Rev. 1
115 /
251
252
300
300.5
301
303
Warning
Warning
Error
(ONLINE)
Error
(ONLINE)
Error
461
462
Error
461
462
1
1
1
1
1
1
1
40978
30114
411yy
yy: paper
size
4083x
x: Tray #
482yy
483yy
482yy
483yy
PU flush error (Error occurs during the alteration of PU
farm or it failed in the alteration in PU flush of such as
LED Head information.)
%PUFLASH%
PU
TRAY2
DUPLEX
Invalid data was received. Press the On-line switch and
eliminate the warning. Displayed when unsupported
PDL command is received or a spool command is
received without HDD.
* GDI printer only
Manual paper feed is required. Manually insert the
paper shown by %MEDIA_SIZE%.
The unit of paper size in Custom: The unit specified for
MPTray (menu setting) is used if no unit is specified by
the driver. When the driver specifies a unit, the unit is
used for display.
Paper size displays in Custom mode:
"<width>x<length><unit>"
ex.) 210x297mm
8.5x11.0inch
The unit of paper size in Custom: The unit specified for
MPTray (menu setting) is used if no unit is specified by
the driver. When the driver specifies a unit, the unit is
used for display.
The PostScript back channel message is assigned as
#1 of the table in 'PX723 PS BackChannel Message list
for EFI' specification.
Paper feeding is reccomended because the print of
back sides(odd number pages) is finished during the
Manual Duplex print.
%TRAY%
Tray1
MANUAL
The media type in the tray and the print data do not
match. Load mmmmmmm/pppppp paper in tttttt tray (It
takes a while until the status disappears after you have
closed the tray and the lever lifted.)
(tttttt : TrayName,mmmmmm :
PaperName.pppppp : MediaTypeName)
Error 461 : Tray1
Error 462 : Tray2
Paper size displays in Custom mode:
"<width>x<length><unit>"
ex.) 210x297MM
8.5x11.0INCH
The unit of paper size in Custom: The unit specified for
MPTray (menu setting) is used if no unit is specified by
the driver. When the driver specifies a unit, the unit is
used for display.
As a user pressed ONLINE key, the printer could ignore
this error at the just printing job.
The size of paper or media type in the tray does not
match the print data.
Load paper in tray
(It takes a while until the status disappears after you
have closed the tray and the lever lifted.)
Error 461 : Tray1
Error 462 : Tray2
The paper size displaying form of the custom mode is
the same as above.
As a user pressed ONLINE key, the printer could ignore
this error at the just printing job.
Priority
Level
Function
LED Blinking Pattern
PL
Status Code
ONLINE PAPER
ALERT