Menu functions > 27
Print Setup
(cont.)
Mono-Print
Speed
Auto
Color Speed
Normal Speed
High Quality
Sets the monochrome print speed. Prints at the most
appropriate speed for page process if
Auto
is set.
Prints always at the color print speed if
Color
is set.
Prints always at the monochrome print speed if
Normal
is
set.
Prints always at 26ppm of the gradation print speed for
both color and monochrome print if
High Quality
is set.
Default
Orientation
Portrait
Landscape
Specifies print orientation.
Not valid for PS (valid only for PCL/ IBMPPR/EPSONFX/
HP-GL2).
Form Length
5 lines
~
60 lines
~
128 lines
Sets the number of lines that can be printed on a page
Not valid for PS (valid only for PCL/HP-GL2).
Default values listed to the left are for Letter/A4. In
practice, however, they change according to the size of
paper loaded in the tray.
Edit Size
Cassette Size/
Letter/
Executive/
Legal14/
Legal13.5/
Legal13/A4/A5/
A6/B5/Custom/
C5/Com-10
Envelope/
Monarch
Envelope/DL
Envelope/C5/
Com-9 Envelope
Sets the size of an area to draw when the host PC does
not specify the size via the paper edit size designating
command (Not valid for PS - only for PCL).
Trapping
Off
Narrow
Wide
Trapping, or spreading and choking, is a prepress
technique consisting of creating small overlaps between
abutting colors in order to mask registration issues in the
graphical production.
Trapping X
Width
0
pixels
~
4 pixels
Sets the horizontal dimension of the trapping area.
Trapping Y
Width
0
pixels
~
4 pixels
Sets the vertical dimension of the trapping area.
X Dimension
64 mm
~
210 mm
~
216 mm
Specifies paper width of Custom paper as a default value.
Sets a paper size at right angles to the paper run
direction.
Y Dimension
127 mm
~
297 mm
~
1220 mm
Specifies paper length of Custom paper as a default value.
Sets a paper size in the same direction as the paper run
direction.
ITEM
SETTINGS
EXPLANATION
