SETTING UP > 58
Parallel menu
USB menu
Item
Value
Description
PARALLEL
Enable
; Disable
Selects parallel (Centronics) interface.
BI-DIRECTION
Enable
; Disable
Selects bi-directional communication.
ECP
Enable; Disable
Selects ECP mode.
ACK WIDTH
Narrow
(0.5µs); Medium
(1.0µs); Wide (3.0µs)
Sets ACK width for compatible
reception.
ACK/BUSY
TIMING
ACK-in-Busy
; ACK-
while-Busy
Sets output order for ACK and BUSY
during reception.
ACK IN BUSY: BUSY=LOW to the end of
the ACK pulse.
ACK WHILE BUSY: BUSY=LOW to the
Centre of the ACK pulse.
I-PRIME
3 micro-sec; 50 micro-
sec;
Disable
Sets or disables the i-Prime signal.
OFFLINE RECEIVE
Enable;
Disable
When set to Enable, this function
maintains reception without changing
the interface signal, even though an
alarm occurs.
The interface stays open even if the
operator panel Off-line switch is
pressed.
The interface issues a BUSY signal
only when the receive buffer is full or
when a service call occurs.
Item
Value
Description
USB
Enable
; Disable
Selects USB interface.
SOFT RESET
Enable
; Disable
Selects use of soft reset command.
OFFLINE RECEIVE
Enable;
Disable
When set to Enable, this function
maintains reception without changing
the interface signal, even if an alarm
occurs. The interface stays open even
if the operator panel Off-line switch is
pressed. The interface issues a BUSY
signal only when the receive buffer is
full or when a service call occurs.
Summary of Contents for C7300
