- 86 -
5. Management / Setting the Printer
*1 Factory default setting values are different according to the country or region.
*2 The values are displayed with the unit set in [Admin Setup] > [Tray Setup] > [Unit of Measurement].
• Menu > System Adjust
• Menu > Print Adjust > Print Position Adjust
Tray1 Config
Paper Size
Cassette Size
Selects a paper size for Tray 1.
X Dimension
210 millimeter
or 8.5 inch *
2
Sets a width of a custom paper for Tray 1.
Y Dimension
297 millimeter
or 11.0 inch *
2
Sets a length of a custom paper for Tray 1.
Media Type
Plain
Selects a paper type for Tray 1.
Media Weight
Light
Selects a paper weight for Tray 1.
Legal Paper
Legal14
Sets a legal paper size for Tray 1.
Other Size
16K
(184 x 260 mm
) [SEF]
Sets other standard paper size for Tray 1.
Tray2/3/4/5
Config *
* Displayed
when an
optional tray is
installed.
Paper Size
Cassette Size
Selects a paper size for Tray 2/3/4/5.
X Dimension
210 millimeter
or 8.5 inch *
1
Sets a width of a custom paper for Tray 2/3/4/5.
Y Dimension
297 millimeter
or 11.0 inch *
1
Sets a length of a custom paper for Tray 2/3/4/5.
Media Type
Plain
Selects a paper type for Tray 2/3/4/5.
Media Weight
Light
Selects a paper weight for Tray2/3/4/5.
Legal Paper
Legal14
Sets a legal paper size for Tray 2/3/4/5.
Other Size
16K
(184 x 260 mm
) [SEF]
Sets other standard paper size for Tray 2/3/4/5.
Paper Feed
Tray1
Selects a paper tray.
Auto Tray Switch
On
Sets whether to enable the auto tray switching function.
Tray Sequence
Down
Sets the priority of tray order for auto tray selection/auto tray
switching.
Duplex Last Page
Skip Blank
Page
When [Skip Blank Page] is selected, the last page of an odd-
numbered duplex print job is printed in simplex.
When [Always Print] is selected, the printer always prints a
document in the duplex mode if the duplex mode is selected.
Some applications may not work properly.
Item
Factory
Default
Description
Power Save Time
1 minute
Sets how many minutes the printer waits before activating the
power save mode.
Sleep Time
15 minutes
Sets the time to switch from the power save mode to the
sleep mode.
Item
Factory
Default
Description
Auto Power Off Time
4 hours
Sets the time to switch from the standby mode to the power
off mode.
Silent Mode
On
Specifies a print preparation operation when entering standby
status from Sleep mode.
[On]: It is quiet as there is no print preparation.
[Off]: There is a rotation noise of the image to perform print
preparation but you can start first printing early.
Clearable Warning
ONLINE
Sets the timing for deletion of clearable warnings.
Auto Continue
Off
Sets whether to recover the printer automatically when a
memory overflow or tray requesting occurs.
Manual Timeout
60 seconds
Sets how many seconds the printer waits for the paper to be
fed from the manual paper tray.
Timeout InJob
40 seconds
Sets how many seconds the printer will wait before force
printing a job after the data stops coming.
Timeout Local
40 seconds
Sets how long each port is left opened after a job is complete.
(The network is excluded.)
Timeout Network
90 seconds
Sets how long the network port is left opened after a job is
complete.
Low Toner
Continue
Sets whether to continue or stop printing when a low on toner
error occurs.
Print Mode w/o Color Toner
Alarm
Specifies the action when there is an empty color toner.
[Alarm]: The machine stops without printing the color print
job. Replace the toner cartridge with a new one.
[Cancel]: Cancels a new color print job automatically.
Replace the toner cartridge with a new one.
Jam Recovery
On
Sets whether the printer will attempt to re-print any pages lost
due to a paper jam once the jam has been cleared.
Error Report
Off
Sets whether to print out the error details when an internal
error occurs.
Hex Dump
Execute
Prints out the data received from the host computer in
hexadecimal dump format.
Turning off the power switches the printer to the normal print
mode from the HEX Dump mode.
Item
Factory
Default
Description
