- 87 -
5. Management / Setting the Printer
• Menu > Print Adjust
Item
Factory
Default
Description
MPTray
X Adjust
0.00 millimeter Adjusts the position of the printing image of the each tray.
• X Adjust: Adjusts the position of the entire printing image
perpendicular to the direction of paper movement.
Available range: ±2.00 mm (0.25 mm increments).
• Y Adjust: Adjusts the position of the entire printing image
parallel to the direction of paper movement. Available
range: ±2.00 mm (0.25 mm increments).
• Duplex X Adjust: Adjusts the position of the image on the
back side of a duplex print perpendicular to the direction of
paper movement. Available range: ±2.00 mm (0.25 mm
increments).
• Duplex Y Adjust: Adjusts the position of the image on the
back side of a duplex print parallel to the direction of paper
movement. Available range: ±2.00 mm (0.25 mm
increments).
Tray2/3/4/5: Displayed when an optional tray is installed.
Y Adjust
0.00 millimeter
Duplex X
Adjust
0.00 millimeter
Duplex Y
Adjust
0.00 millimeter
Tray1
X Adjust
0.00 millimeter
Y Adjust
0.00millimeter
Duplex X
Adjust
0.00 millimeter
Duplex Y
Adjust
0.00 millimeter
Tray2/3/4/5
X Adjust
0.00 millimeter
Y Adjust
0.00 millimeter
Duplex X
Adjust
0.00 millimeter
Duplex Y
Adjust
0.00 millimeter
Item
Factory
Default
Description
Paper Black Setting
0
Adjusts finely if the black contrast becomes weak or blots or
lines become conspicuous when printing on plain paper.
If fine blots or lines appear, decrease the value. If the dark
part becomes light, increase the value.
Paper Color Setting
0
Adjusts finely if the color contrast becomes weak, or blots or
lines become conspicuous when printing on plain paper.
If fine blots or lines appear, decrease the value. If the dark
part becomes light, increase the value.
Trans. Black Setting
0
Adjusts finely if the black contrast becomes weak, or blots or
lines become conspicuous when printing on special paper.
If fine blots or lines appear, decrease the value. If the dark
part becomes light, increase the value.
Trans. Color Setting
0
Adjusts finely if the color contrast becomes weak, or blots or
lines become conspicuous when printing on special paper.
If fine blots or lines appear, decrease the value. If the dark
part becomes light, increase the value.
SMR Setting
Cyan
0
Corrects variations in print results caused by temperature
and humidity conditions and differences in print density and
frequency. Change the setting if the print quality is uneven.
Magenta
0
Yellow
0
Black
0
BG Setting
Cyan
0
Corrects variations in print results caused by temperature
and humidity conditions and differences in print density and
frequency. Change the setting if the background is dark.
Magenta
0
Yellow
0
Black
0
HU Setting
Off
This must be set when the printer is used again after not
being used for an extended period.
VL Cleaning
Execute
Used when vertical white streaks appear.
Drum Cleaning
Off
Sets whether to perform drum rotating before printing to
reduce lateral white lines on the print. Note that drum rotating
shortens the ID life.
High Humid Mode
Off
Sets the curling reduction mode to on/off.
Mode1/Mode2:
Set this mode when you want to reduce the paper curling
problems in [OFF] Mode.
If you are not satisfied with the result of [Mode 1], try [Mode
2].
[Effect: OFF < Mode 1 < Mode 2]
<Note>
• This mode requires longer warm-up time than when the
mode is OFF, and the time required for printing becomes
longer.
[Print time: OFF < Mode 1 < Mode 2]
• [Mode 1] and [Mode 2] require changes of process and
may reduce the life of image drums.
Moisture Control
Off
Sets whether to enable the condensation control. When
[Mode 1] or [Mode 2] is set, paper absorbs extra moisture at
high humidity and prevent the top of the sheets from wetting.
It may take longer time to complete printing the first page.
Item
Factory
Default
Description
