36
b. Holding the Staple Unit (3) as shown, raise the light blue
Knob (1) and remove the Staple Cartridge unit (2).
3. Remove the jammed staples
a. Use the handle (2) to open the car-
tridge unit.
b. Remove and discard the jammed sta-
ples (1).
c. Use handle (2) to close the cartridge
unit.
4. Fit the Staple Cartridge unit into the
Staple Unit.
WARNING:
Be careful to avoid components and edges inside the Finisher.
a. Push the Staple Cartridge unit (1) into the Staple Unit (2)
until a click is heard.
b. Rotate the Staple Unit (2) in the direction of the arrow.
5. Attach the Finisher to the printer.
a. Close the Staple Cover (2).
1
2
3
2
1
1
2
2
1
Summary of Contents for C9300 Series
Page 1: ......
