38
a. Rotate the Decurler Lever (1) to point downwards.
b. Rotate the Release Lever (3) upwards and detach the Fin-
isher from the printer.
c. Open the Staple Cover (1) to expose the Staple Unit (2).
2. Remove the Staple Cartridge unit from the Staple Unit.
WARNING:
Carefully avoid components and edges inside the Finisher.
Do not touch the Staple Unit motor (3) which may be hot.
a. Lift the blue Lock Lever (1)
and rotate the Staple Unit (2)
in the direction of the arrow.
b. Holding the Staple Unit (3) as
shown, raise the light blue Knob
(1) and remove the Staple Car-
tridge unit (2).
1
2
3
1
2
3
2
1
1
2
3
Summary of Contents for C9300 Series
Page 1: ......
