Oki C9800 Series Service & Troubleshooting Manual Download

Page: 15 / 135

System Adjust

Item

Description (Printer Defaults are indicated in

Blue

)

Power Save Time

Sets the period after which power save mode starts. 5 min, 15 min, 30 min,

60 min

240 min

Clearable Warning

When Online is selected, you must manually clear the warning by pressing the Online
button. Change to Job if you wish the message to automatically clear when a new print

job is received.

Online

or Job

Auto Continue

Sets whether the printer is automatically recovered when Memory Overflow or Tray

Request occurs. ON or

OFF

Manual Timeout

If paper is not fed within this time in manual feed, the job is cancelled. OFF, 30 sec,

sec.

Wait Timeout

Sets the time period between stopping receipt of job data and forced print. For PS,

printing is not carried out and the job is cancelled. Range is off, 5 sec. to 300 sec.

default is

40 sec.

Low Toner

Sets the printing operation when insufficient toner is detected.

Continue

the printer

can continue printing while remaining online. Stop: the printer stops printing and goes

offline.

Jam Recovery

: continues printing the job, including any jammed pages, once the jam has been

cleared. OFF: Cancels a job including the page currently jammed.

X Adjust - Adjusts the position of the whole printing image (0.25 mm at a time)

Range is -2.00 to +2.00 mm (horizontally). Default is

0.00mm.

Y Adjust - Adjusts the position of the whole printing image (0.25 mm at a time)

Range is -2.00 to +2.00 mm (Vertically). Default is

0.00mm.

Duplex X Adjust - During the flip-side printing of duplex printing, adjusts the position of

the whole printing image (0.25 mm at a time. Range is -2.00 to +2.00 mm

(horizontally). Default is

0.00mm.

Print Position Adjust

Duplex Y Adjust - During the flip-side printing of duplex printing, adjusts the position of

the whole printing image (0.25 mm at a time. Range is -2.00 to +2.00 mm (Vertically).

Default is

0.00mm

Darkness Cyan, Magenta,
Yellow, Black

Adjusts the engine density for Cyan, Magenta, Yellow, Black. Darkest value is +3,

Lightest value is -4. Default is

Cyan Magenta Yellow

Reg Fine Adjust

Makes fine adjustment to image registration against Black in the horizontal direction.

Adjust. is for Cyan, Magenta, Yellow. Range is -3 to +3. Default is

Paper Black Setting

Used for micro adjustment when very visible faded print results or light specks (or

streaks) result when printing in Plain Paper/Black setting. Range is -2 to +2. Decrease
the value if light specks (or streaks) or snow flake like printing results in high density

print areas. Default is

Paper Color Setting

Used for micro adjustment when very visible faded print results or light specks (or

streaks) result when printing in Plain Paper/Color setting. The range is -2 to

+2.Decrease the value if light specks (or streaks) or snow flake like printing results in
high density print areas. Default is

Transparency Black Setting

As for Paper Black Setting above. The range is -2 to +2. Default is

Transparency Color Setting

As for Paper Color Setting above. The range is -2 to +2. Default is