C9800 User’s Guide> 54
O
PTIONAL
ACCESSORIES
This section describes optional accessory equipment for your printer.
The following accessories are available:
>
memory expansion DIMM
>
second, third paper tray (to increase paper input capacity)
>
high capacity feeder (equivalent to three paper trays)
(C9800hdn only)
NOTE
1.
Tray configurations are: Tray 1 only, Tray 1 + 2nd Tray, Tray
1 + 2nd Tray + 3rd Tray, Tray 1 + HCF, Tray1 + 2nd Tray +
HCF
2.
The C9800hdtn already has a High Capacity Feeder installed
and so can only accommodate one additional tray (to give the
maximum total of five).
>
Finisher (for stapling or saddle stitching printer output)
>
Punch unit (to extend Finisher functionality)
Summary of Contents for C9800hdn
