background image

C9800 User’s Guide> 35

Restart). Available to support staff to allow printer 
configurations and special functions to be set.

C

ONFIGURATION

 

INFORMATION

Configuration information displays printer configuration 
information such as internal firmware versions.

Menu options at each level can be scrolled through by moving the 
highlight with the 

Up-arrow

/

Down-arrow

 buttons and a 

highlighted option at that level can be selected by pressing the 

Enter

 button. When the lowest level menu has been selected, you 

can change the setting for that menu by selecting the required 
highlighted value from a list or by entering a numeric value. In other 
cases, you can display or print configuration information.

H

ELP

 

MODE

When an error has occurred, press the 

Help

 button. Information 

displays that will help you correct the error.

D

ISPLAY

 P

ANEL

 

MESSAGES

The display panel messages, supplemented by the Help messages 
where appropriate, are intended to be self-explanatory. More 
information on typical messages is provided in 

“Appendix A – Display 

Panel Messages” on page 131

.

U

SING

 

THE

 

MENUS

NOTE
Menu details are given in 

“Appendix B – Menu system” on 

page 133

 for reference.

The 

Enter

Up-arrow

Down-arrow

 and 

Back

 buttons are used to 

move through the printer menus. You can adjust settings (e.g. set 
the paper size for Tray 1) or view information (e.g. how much is left 
of a selected consumable).

Many of these menu settings can be, and often are, overridden by 
settings in the Windows printer drivers. However, several of the 
driver settings can be left at "Printer Setting," which will then default 
to the settings entered in these printer menus.

Summary of Contents for C9850hdn























































































































































Reviews: