ES9160 MFP / ES9170 MFP
© 2012 OKI DATA CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 66
[E440] Feed cover opened during printing
Classification
Error content
Cover open jam
Feed cover open jam
Proce
dure
Check item
Result
Measure
Next
Step
1
Is the feed cover open?
Yes
Remove the paper if there is any, then close
the cover.
No
2
2
Is the feed cover opening/
closing detection sensor
working?
(Perform the input check
in the test mode: 03-
[FAX]ON/[9]/[E])
Yes
3
No
•
Check if the connector of the feed cover
opening/closing detection sensor is
disconnected.
•
Check if the connector CN311 on the LGC
board is disconnected.
•
Check if the connector pins are
disconnected and the harnesses are open
circuited.
•
Check if the conductor pattern on the LGC
board is short circuited or open circuited.
•
Replace the feed cover opening/closing
detection sensor.
•
Replace the LGC board.
3
Replacing board
•
Replace the LGC board.
Parts to be replaced
Remark
Feed cover opening/closing
detection sensor
LGC board
Summary of Contents for ES9160
