8 [Administration] Tab Page
166 [Setup] Item List
Setting up POP3 Network Service
In POP3 Network Service, you can specify the POP3 server to receive an Internet Fax and E-mails.
Item name
Description
1
Enable POP3 Client
Select whether retrieving an Internet Fax and an E-mail from the POP3 server is enabled or
disabled. [Enable] is set as the default.
2
Enable SSL
Select whether the SSL (Secure Sockets Layer) is enabled or disabled for POP3
transmission.
y
Disable
— Select this to disable the SSL for POP3 transmission.
y
Verify with imported CA certification(s)
— Select this to enable the SSL using the
imported CA certificate.
y
Accept all certificates without CA
— Select this to enable the SSL without using
imported CA certificate.
y
When [Verify with imported CA certification(s)] is selected, you must import the CA certificate in this equipment.
P.275 “[Security] How to Set and How to Operate”
y
Not all operating systems support SSL for all protocols.
3
POP3 Server Address
Enter the IP address or FQDN (Fully Qualified Domain Name) of the POP3 server when
[Enable POP3 Client] is enabled. You can enter up to 128 alphanumerical characters and
symbols other than =, ; (semicolon), #, and \ (backslash).
If you use FQDN to specify the POP3 server, you must configure the DNS server and enable the DNS in the DNS Session.
When the [Obtain a POP3 Server Address automatically] option is enabled in the TCP/IP settings, you can obtain the POP3
server address from the DHCP server.
4
Authentication
Enable or disable the authentication for accessing the POP3 server.
y
Disable
— Select this to disable the authentication.
y
NTLM/SPA
— Select this to access the POP3 server using the NTLM/SPA
authentication.
y
Kerberos
— Select this to access the POP3 server using the Kerberos authentication.
5
Type POP3 Login
Select the POP3 login type.
y
AUTO
— Select this to automatically designate the POP3 log-in type of the POP3
server.
y
POP3
— Select this to use the general POP3 log-in type.
y
APOP
— Select this to use the APOP log-in type. APOP allows users to access the
POP3 server by encrypting the user name and password.
If it is not possible to log in to the mail server using [Auto], manually set the type of POP3 log in to either [POP3] or [APOP].
1
2
3
4
5
6
7
8
9
10
11
Summary of Contents for ES9455
