8.[Administration] Tab Page
[Setup] Item List 203
8 [Administration] Tab Page
InternetFax settings
You can specify Internet Fax settings. This section describes necessary settings for Internet Fax transmissions.
The [InternetFax] submenu can be accessed from the [Setup] menu on the [Administration] tab.
See the following pages for how to access it and information on the [Setup] menu:
Some settings may not be reflected on the touch panel immediately after saving them. The settings will be updated by
pressing the [RESET] button on the control panel or after an Auto Clear time period.
Setting up InternetFax Setting
You can specify the fragment page size and default body strings that apply to the Internet Faxes.
Item name
Description
1
From Address
Enter the E-mail address of this equipment.
The [From Address] must be entered to enable Internet Fax transmission. However, the E-mail address of the user who is
logged in to this equipment will be automatically set if any user management settings apart from MFP local authentication are
enabled. For more information about User Management Setting, see the following section:
P.139 “[Administration] Tab Page”
2
From Name
Enter the name of this equipment.
3
Message Header (Inbound FAX
Routing)
Select TTI to be used as a subject when the received Internet Fax is forwarded.
4
Number of Retry
Enter the number of times to try sending the Internet Faxes when it fails. “3” is set as the
default.
5
Retry interval
Enter the interval to try sending the Internet Faxes when it fails. [1minutes] is set as the
default.
When the [Number of Retry] and [Retry interval] options are changed, the [Number of Retry] and [Retry interval] options in the
E-mail settings are also changed.
6
Fragment Message Size
Select the size of the message fragmentation.
7
Default Body Strings
Enter the body text that will be automatically entered in the [Body] box when users operate
Scan to Internet Fax from the touch panel. This sets only the default body text, so that it can
be changed on each operation by users.
8
Body String Transmission
Select whether the body strings will be sent or not.
1
2
3
4
5
6
7
8
Summary of Contents for ES9455
