background image

11-6 R

epoRt

 & L

ists

1. No. — The number of the communication
2. Name — Registered in the following order

 

(1) TTI number registered for the  

 

     destination name

 

(2) Space

3. Mode — Resolution in the communication
4. Start Time — The time the communication started
5. Time — The time required for the communication
6. Page — The number of pages received
7. Dept. —  When “Department code” has been set, the 

department number is recorded here.

8. Result — Communications results.

OK

Completed normally

*

 Communicated in ECM mode

#

 Communicated via super G3

Error code:  Finished abnormally 

(For information regarding error 

codes, refer to page 12-17.)

9. Remarks —

Polling: 

Polling reception

Manual:  Manual reception

F-Polling:  Indicates F-code polling

Security:   Received in F-code security box

Relay: 

Received by F-code relay

Bulletin:   Received in F-code bulletin box

Stored document list

Your machine can print a list of documents stored in memory.  It will tell you how much 

memory each document is using.
The list includes:
• Type — The type of the document, such as “Batch box”.
• Data (in Kbyte) — How much memory is used for the document.
• Page — The number of pages.
• Note — Other information, such as the box number.

To print the list of documents stored in memory:
Press <Menu>, <5>, <1>, <2>, <0>, <Enter>.

Erased document notification

• When the image data stored in memory is erased by accident, a notification will be 

printed as soon as the power comes back, listing information about the erased image 

data.

• The following is an example of a received file that has been erased.  In addition, “Com-

mand erased”, “Erased Poll Documents” and “F-Code box document erased” may be 

printed.

  1 

9

Summary of Contents for F0305





























































































































































































Reviews: