2 SENDING/RECEIVING A FAX
20 Sending a Fax
Sending different width originals
To set different width originals, adjust the side guides to the widest original size, and then align the original against the
front side. Available combinations of the original size are as follows.
y
A/B format: A3, A4, B4, B5, A4-R, FOLIO
y
North American format: LD, LT, COMP, LG, LT-R
To send different width originals, you need to enable “DIFFERENT WIDTH” as a transmission condition.
P.21 “Setting the transmission conditions”
Precautions for using the RADF
Do not use the following originals as they may misfeed or become damaged:
The following originals should be handled carefully:
(1) Badly wrinkled or folded originals. In
particular, originals whose leading edge
are curled may fail to be fed.
(4) Clipped or stapled originals
(2) Originals with carbon paper
(5) Originals with holes or torn originals
(3) Taped, pasted or clipped (cut out)
originals
(6) Damp originals (7) OHP film originals
(1) Folded or curled originals should be smoothed out
before being used.
(2) Originals sticking to each other, or originals that are
surface-treated may fail to separate properly.
