6.SETTING ITEMS
Administrator Settings 97
6 SETTING ITEMS
Registering the terminal ID
This section describes how to register the terminal ID of this equipment. If the terminal ID is registered in advance, sender
information can be printed on the leading edge on the transmitted original, and receiver information on the trailing edge on
the received fax.
1
Press [TERMINAL ID].
2
Set each setting option, and then press [OK].
y
You can enter up to 20 characters in the ID NAME, but whether they can all be displayed or not depends on
their size.
y
When you add an international code, press [+]. To enter a pause “ - ”, press [Pause].
y
[LINE2 NUMBER] is displayed only when the 2nd Line for FAX Unit is installed.
