13
Verify the Installation
Print the MenuMap
1. Press
+
one or more times until
INFORMATION MENU appears on the
display.
2. Press ENTER twice.
The MenuMap prints.
3. Look at the top of the printout: “HDD:
installed” should appear.
If you see
“HDD:
un
installed”,
repeat the
installation steps—checking to be sure that
the Hard Disk Drive is
firmly
seated in the
printer connector—until it does.
Summary of Contents for Hard Disk Drive
