OkiLAN 6200e Plus User’s Guide
TCP/IP
102
IP Address Resolution
•
Set Permanent
- Select this option to make the IP
address permanent. If the Network Print Server
has been configured to remember its IP address, it
does not need to determine its address each time it
is powered on. Enter the IP address for the Net-
work Print Server. The IP address must follow the
format XXX.XXX.XXX.XXX, where each XXX is a
number from 0 to 255.
CAUTION: If you select an invalid IP address, you
may not be able to access the Network Print
Server.
•
Use Network Protocol
- Select this option to use
RARP, BOOTP or DHCP to determine the IP
address at power up. Specify which protocol(s) to
use.
Subnet Mask
If your network environment includes subnets, you
should set the subnet mask. The subnet mask must
follow the format XXX.XXX.XXX.XXX, where each
XXX is a number from 0 to 255.
The default subnet mask is 0.0.0.0. The Network Print
Server interprets a subnet mask of 0.0.0.0 or
255.255.255.255 as no subnet mask specified.
