OkiLAN 6200e Plus User’s Guide
TCP/IP
109
Get Community Name
This field is used to set the community name required
to
Get
information from the print server. The default
community name is
public
.
Note: For JetAdmin to function correctly with the
Network Print Server, the SNMP Get and Set com-
munity name must be set to public.
Set Community Name
This field sets the community name required to Set
information on the Network Print Server. The default
community name is
public
.
Note: The Network Print Server cannot be config-
ured without the correct Set community name. To
secure the configuration of the Network Print
Server, change the community name from the
default setting.
Trap Community Name
Enter the community name used when traps are sent
from the Network Print Server. This setting allows trap
utilities only to accept traps from devices with appro-
priate community names.
The trap community name field is used by OkiNet Alert
and other network monitoring utilities for grouping or
filtering Network Print Server devices. OkiNet Alert
assists in managing network printers by immediately
alerting you of printer problems.
