OkiLAN 6200e Plus User’s Guide
TCP/IP
122
Note: The configuration of your Network Print
Server is password protected. Only authorized
users can alter the configuration.
Running a Telnet Session
1. To run the configuration utility, type the following:
telnet
<
Network_Print_Server_name
>
2. Replace
Network_Print_Server_name
with the IP
address or the host name assigned to the Network
Print Server you want to configure. A screen will
appear displaying an introductory message. When
prompted for a password, enter
OkiLAN
. The
password will not be echoed.
3. When you are finished typing your password, press
Enter
. For password verification, you will then be
asked to enter your password again. Each time you
use the utility, you will be asked to enter your pass-
word. If you fail to enter the password correctly in
three attempts, your connection with the Network
Print Server will be closed.
4. Once your password is entered and accepted, a list
of options displays. An explanation of each option
follows.
************************************************************
Network Print Server Configuration
Utility
1. Show Network/Printer Information
2. Change Password
3. Specify Print Server IP Address
