OkiLAN 6200e Plus User’s Guide
TCP/IP
125
The default subnet mask is 0.0.0.0. The Network Print
Server interprets a subnet mask of 0.0.0.0 or
255.255.255.255 as no subnet mask specified.
If you change the subnet mask, the change remains
undetected until the Network Print Server is reset or is
powered off and on.
Note: If you select an invalid subnet mask you may
not be able to access the Network Print Server.
Use this option with care!
Identify Default Gateway IP Address (Option 5)
If your local network is attached to other networks, you
must specify the address of your default gateway.
Whenever packets need to be sent to another net-
work, the default gateway is used.
The gateway address must follow the format
XXX.XXX.XXX.XXX, where each XXX is a number
between 0 and 255.
When the default gateway is changed, it remains
undetected until the Network Print Server is reset or is
powered off and on.
Note: If you select an invalid default gateway or
the default gateway goes down, the Network Print
Server may not be able to communicate with non-
local networks.
Configure Port (Option 6)
After the Configure menu appears, you can access the
following configuration option screens.
Specify Configuration Page Language
