OkiLAN 6200e Plus User’s Guide
TCP/IP
150
this command. If rlp is running (that is, if you see
output after executing this command), kill the pro-
cess with the command:
kill -15 process_number.
3. Make sure the following entry is in the “/etc/
inetd.conf” file:
printer stream tcp nowait root “/
usr/lib/ rlpdaemon” rlpdaemon -i
If the rlp dae-
mon is not running when a print request is made,
this entry in “/etc/inetd.conf” will tell inetd to auto-
start the rlp daemon and service the pending print
request. This is helpful if the daemon died or was
terminated for some reason. For more information
on inetd or “/etc/inetd.conf”, type
man inetd
or
man inetd.conf
.
4. Make sure the following entry is in the “/etc/ser-
vices” file:
printer 515/tcp spooler
5. Start inetd by typing the following at the UNIX
prompt:
/etc/inetd -c
Procedure
HP-UX uses an interactive utility called SAM (System
Administration Manager) to configure printing.
1. Login to the HP-UX system as root.
2. Invoke the SAM utility by typing
sam
at the UNIX
prompt. (We suggest you do this at the system
console. SAM uses a screen oriented interface that
works best at the console.)
3. Select the following options from the SAM menu:
Printers and Plotters -> Printers/Plotters -> Actions
-> Add a Remote Printer (Do
NOT
add a Network
Printer) A form appears asking you to define a
remote printer.
