OkiLAN 6200e Plus User’s Guide
TCP/IP
152
5. Select the
OK
button. A status window will outline
the tasks performed to install the queue. When you
see the message
task completed
, select
OK
.
6. Pull down the
Lists
menu and select
Exit
.
7. Select the
Exit SAM
button.
8. Test printing to the Network Print Server with the
following command:
lp -d lj4 filename
Configuring HP-UX v10.xx for Printing with
the Network Print Server
This application note describes the configuration of the
printing system on the HP-UX ver. 10.xx of the UNIX
operating system. For clarity and brevity, the following
specific names will be used to represent general
devices or concepts.
•
lj4
- The local queue name on the HP-UX system
to which print jobs will be directed. The print jobs
are destined for a printer attached to the Network
Print Server.
•
OKIPRINTER
- The host name of the
remote sys-
tem
which is the Network Print Server. For exam-
ple, to
telnet
to the Network Print Server and
invoke the Network Print Server Configuration util-
ity, you would type
telnet OKIPRINTER
. A host
name is not required for the Network Print Server,
the IP Address may be used.
