background image

OkiLAN 6200e Plus User’s Guide

TCP/IP

159

yourqueuename

 - This is the name of the queue 

on the Network Print Server and must end with 1 or 

2, depending on the port selected to service the 

print jobs. If FF, LF or NF are the last two letters of 

the queue name, the job will be converted accord-

ingly. For more information, see Remote Print 

Queue Names.

Prerequisites

Before you proceed, the name OKIPRINTER and the 

IP address assigned to the Network Print Server 

should be in the “/etc/hosts” file on the AIX system.

Procedure

To configure the AIX machine so that users can spool 

print jobs to the pcl2 print queue on the Network Print 

Server named OKIPRINTER, do the following:

1. Login to the AIX machine as root.

2. Invoke the 

SMIT

 utility by typing:

 AIX> smit 

<enter>

3. To add a remote queue, select the following 

options from the 

SMIT

 menu: Spooler (Print Jobs 

and Printers) Manage Remote Printer Subsystem 

Client Services Remote Printer Queues Add a 

Remote Queue A form appears asking you to 

define a remote print queue.

4. Enter information into the following fields as 

described. All other fields should use the default 

value.

a

NAME of queue to add

 - 

lj4

 This is the name of 

the local print queue.

Summary of Contents for LAN 6200E







































































































































































































































Reviews: