- 40 -
8.8 ^BA CODE 93 BAR CODE
Format: ^BAo,h,f,g,e
o = Font rotation
N : 0°
R : 90°
I : 180°
B : 270°
When omitted: Value of ^FW
* The point of origin differs depending on the coordinate designated in ^FT and ^FO.
h = Bar code height (in dots)
203-dpi printer: LE840
1 to 800 dots
300-dpi printer: LE850
1 to 1200 dots
When omitted: Value of ^BY
*1 If the value after dot-to-mm conversion exceeds 100 mm, it is corrected to 100 mm.
*2 If 0, a string, or other value is selected, it is corrected to 10 dots.
f = Print interpretation line
Y : Printed
N : Not printed
When omitted: Y
g = Print interpretation line above code
Y : Printed
N : Not printed
When omitted: N
e = Print check digit (Unsupported)
Y : Printed
N : Not printed
* The printer operates with this parameter set to “N: No.”
*1 The character type of the interpretation line is independent of the module width value of ^BY. Font
A is used in any case.
*2 To print the interpretation line above code, the interpretation line parameter (parameter f) needs to
be set to “Y.”
*3 If the command is sent without setting data (only ^FS and ^XZ are set while ^FD^FS and ^FD are
not set), the barcode will not be printed.
