- 59 -
8.26 ^CF CHANGE ALPHANUMERIC DEFAULT FONT
Format: ^CFf,h,w
f = Default font setting
A to Z, 0 to 9
Default: A
When omitted: Previous CF value
h = Individual character height (in dots)
0 to 32000
Default: 9
When omitted: Calculated from the width based on the ratio *1
w = Individual character width (in dots)
0 to 32000
Default: 5
When omitted: Calculated from the height based on the ratio *1
*1 If both the character height and width are omitted from ^A command, this is calculated based on
the ^CF value.
*2 For Font 0, if the character height/width exceeds 150 mm, it is corrected to 150 mm.
(While Zebra accepts values up to the paper length, this is rounded to 1500 dots.)
