- 54 -
8.21 ^BX DATA MATRIX BAR CODE
Format: ^BXo,h,s,c,r,f,g
o = Font rotation
N : 0°
R : 90°
I : 180°
B : 270°
When omitted: Value of ^FW
* The point of origin differs depending on the coordinate designated in ^FT and ^FO.
h = Height of individual symbol elements
1 to 99 dots
When omitted: Value of ^BY
s = ECC type
0, 50, 80, 100, 140, or 200
When omitted: Value of ^FW
c = Columns to encode
9 to 49
Quality 0 to 140: Odd value
Quality 200: Even value
値
When omitted:
When the number of rows is set, this is the same value as the number of rows.
When the number of rows is also omitted, this is automatically set depending on the number of
data.
r = Rows to encode
9 to 49
Quality 0 to 140: Odd value
Quality 200: Even value
When omitted:
When the number of columns is set, this is the same value as the number of columns.
When the number of columns is also omitted, this is automatically set depending on the number
of data.
f = Format ID
1 to 6
When omitted: 6
g = Escape sequence control character
Any character
Omitted: _ (underscore)
This parameter is valid only when the ECC type is set to 200.
*1 For the control character, ‘~,’ ’^,’ and codes that cannot be entered using the key are not supported.
*2 If the command is sent without setting data (only ^FS and ^XZ are set while ^FD^FS and ^FD are
not set), the barcode will not be printed.
