- 85 -
8.51 ^GB GRAPHIC BOX
Format: ^GBw,h,t,c,r
w = Box width (in dots)
1 to 32000
When omitted: “Line width” in the default setting file
(Line width is used as box width is not specified in the file.)
* If this exceeds the paper width, the end point in the X direction is adjusted to the paper size.
h = Box height (in dots)
1 to 32000
When omitted: “Line width” in the default setting file
(Line width is used as box height is not specified in the file.)
* Since the maximum paper length is 1500 mm, even If this exceeds the paper length in Y direction,
only the data covered by the paper length are printed.
t = Line width (in dots)
1 to 32000
When omitted: “Line width” in the default setting file
c = Line color
B : Black
W : White
When omitted: B
r = Corner rounding
0 to 8
When omitted: 0
*1 With Oki Data, lines are thickened outward. Thus, for a box shape almost painted over with thick
lines, the size of the base box shape must be small. Therefore, the corner-rounding amount
calculated based on the base box shape is necessarily small and the corner-rounding amount for a
box shape with thick lines is not the same as that with Zebra.
*2 If the box width is set to a value exceeding the paper width, the end point in the X direction is
adjusted to the paper width. In this case, if the line width is set to a value exceeding 1 dot, printing
is performed beyond the paper width for the amount the right side of the box shape exceeds 1 dot
and the portion exceeding the head width is wrapped around for printing.
