2 English
near a heat source (such as a radiator or heat register). Keep the
product out of direct sunlight.
• Always use this product in a well ventilated area. Allow enough
room around the product for adequate ventilation and easy access
to the paper trays. If you put the product in any kind of enclosure,
make sure the enclosure is well ventilated.
• Do not use your product near water. Do not spill liquid of any kind
into it.
• Be certain that your power source matches the rating listed on the
back of the product. If you are not sure, check with your dealer or
with your local power company.
• Do not connect this product to an uninterruptible power supply
(UPS). For further information please contact Oki Data at
1-800-OKI-DATA.
• Your product has a grounded, three-prong plug as a safety feature.
This plug only fits into a grounded outlet. If the plug does not fit,
the outlet may be an older, non-grounded type. Contact an
electrician to have the outlet replaced. Do not use an adapter to
defeat the grounding.
• Install the product near an easily accessed power outlet.
• Avoid damaging the power cord. Do not put anything on it or place
it where it will be walked on. If the cord becomes damaged or
frayed, replace it immediately.
• If you are using an extension cord or power strip with the product,
make sure that the total of the amperes required by all the
equipment on the extension is less than the extension’s rating. The
total ratings of all equipment plugged into the outlet should not
exceed 15 amperes.
• Do not poke anything into the ventilation slots of the product. You
could get an electrical shock or cause hazardous electrical arcing,
which could cause a fire.
• Aside from the routine maintenance described in the
documentation, do not try to service the product yourself.
Removing the cover may expose you to shocks or other hazards.
