Changing Network Settings From the Web Page
- 159 -
Network S
et
tings
8
5
Follow the on-screen instructions to
specify detailed settings.
Memo
Be sure to specify the correct settings for your mail
server. If you enable APOP when your mail server does
not support the APOP protocol, e-mails may not be
received correctly.
When you specify a domain name for the mail server,
configure the DNS server in the [
TCP/IP
] setting.
6
Click [
Send
].
Memo
If the POP server does not support the SSL encryption, e-
mails may not be received correctly.
Configuration for SMTP
1
Access the machine's web page and log
in as the administrator.
2
Select [
Admin Setup
].
3
Select [
Network Manager
]>[
] >
[
Receive Settings
].
4
Select [
SMTP
] and then click [
To
STEP2
].
5
Follow the on-screen instructions to
specify detailed settings.
6
Click [
Send
].
Changing Settings on EtherTalk (for Mac
OS only) (MB451/MB451w/MB471/
MB471w/MB491/ES4191 MFP Only)
Note
EtherTalk cannot be used with Mac OS X 10.6.
Changing EtherTalk Machine Name
1
Access the machine's web page and log
in as the administrator.
2
Select [
Admin Setup
].
3
Select [
Network
]>[
EtherTalk
].
4
Enter a new name in [
Printer Name
].
5
Click [
Submit
].
Changing EtherTalk Zone
1
Access the machine's web page and log
in as the administrator.
2
Select [
Admin Setup
].
3
Select [
Network
]>[
EtherTalk
].
4
Enter a new zone name in [
Zone
Name
].
5
Click [
Submit
].
Note
Be sure to specify a zone within the same segment.
