Using Drivers and Software
- 43 -
Scan
ning
3
9
Click [
OK
].
Fax Transmission of Scanned
Documents
Using the fax service of the Windows component,
you can send a scanned document.
Note
The direction to load the paper cannot be changed after
scanning the documents.
This function uses the fax service of the Windows
component.
Memo
For PC-FAX function, the resolution is fixed to 200dpi and
the color mode is fixed to black and white.
1
Start ActKey on your computer.
2
Press the <
SCAN
> key on the operator
panel of the machine.
3
Press the to select [
Remote PC
] and
then press .
4
Place your document with text face up in
the ADF or face down on the document
glass.
5
Click [
PC-Fax
] scan button of ActKey on
your computer.
The [
Fax Setup
] starts.
6
Follow the on-screen instructions to send
a fax.
Setting the Scan Button
You can change the settings of four scan buttons.
1
Start ActKey.
2
Select [
Button settings
] from
[
Options
] menu.
3
Click a button you want to set.
4
Change the settings if necessary.
5
Click [
OK
].
Using Network Configuration
Network Configuration is a tool to set in advance
when executing Scan To Local PC. In addition, if
the information including the device and IP
address of the computer, etc. is changed when
performing network scan, the setting value can
be changed by this tool.
When installing ActKey, Network Configuration is
also installed simultaneously.
Network Configuration will be automatically run
when you log on windows if you select it in task
tray menu.
When starting Network Configuration, the scanner
driver installed in the computer is displayed.
Note
Even when connected using a wireless LAN, the displayed
MAC address becomes the MAC address of the wired LAN.
Method to add a new network
scanner
To add a new network scanner, select [
Add
Scanner
] from the [
Scanner
] menu, and select
scanner driver name of the added scanner.
Method to change a scanner driver
name
When a scanner driver name has been changed,
select [
Edit Driver Name
] from the [
Scanner
]
menu and then change the scanner driver name.
Method to change the setting
information of the machine
When the IP address of the machine and port
number of the machine have been changed, start
Network Configuration and then select [
Edit
Scanner
] from the [
Scanner
] menu.
The setting value set in the current computer is
displayed, and then change the IP address and
port number of the machine.
OK