background image

Scan To FaxServer

- 32 -

Scan To FaxServer

This section explains how to customize an e-mail when it is sent from this machine to the fax server. You 

can select a format of e-mail address to be set in the TO field. Also, you can add an e-mail text or not.

Enabling the Scan To FaxServer 
function

To enable the Scan To FaxServer function, select 

the followings from the Administrator Menu:
[

Admin Setup

]>[

FaxServer Function

]>

[

Environmental Setting

]. Turn the [

FaxServer 

Function

] ON and restart the MFP.

Note

If this operation is made, the fax function is disabled.

Customizing the destination 
e-mail address

The Prefix and Suffix settings are used in the 

following format. The "Fax number" of this 

format means a number selected in the "Add 

Destination" field.

" Fax Suffix"

For example, if you set "FAX=" as the Prefix and 
set "@faxserver" as the Suffix, the mail 
destination (To:) is set as 

"FAX=012-345-

6789@faxserver"

 when you execute Scan To 

FaxServer.

Note

Set the Prefix and Suffix based on the mail reception 
specifications of your FaxServer. The Virtual Domain and 
others may be required to be set on the mail server due to 
the certain FaxServer operating environment.

1

Press the <

SETTING

> key.

2

Press the   to select [

Admin Setup

], 

and then press  .

3

Enter the administrator password.

4

Press the   to select [

FaxServer 

Function

], and then press  .

5

Press the   to select [

Environmental 

Setting

], and then press  .

6

Enter a character string in the "Prefix" 

column.

7

Enter a character string in the "Suffix" 

column.

8

Press the   until the top screen is 
displayed.

Customizing the e-mail text

If [

Text

] is turned ON, the text is added to the 

mail. If your FaxServer supports the transmission 

of mail text, the text is included in the fax 

transmission data.

1

Press the <

SETTING

> key.

2

Press the   to select [

Admin Setup

], 

and then press  .

3

Enter the administrator password.

4

Press the   to select [

FaxServer 

Function

], and then press  .

5

Press the   to select [

Environmental 

Setting

], and then press  .

6

If the "Text" is set to ON, the text is 

added. If it is set to OFF, the text is not 

added.

7

Press the   until the top screen is 

displayed.

OK

OK

OK

OK

OK

OK

Summary of Contents for MB441MFP

















































































































































































Reviews: