Oki MC573 Advanced Manual Download

Page: 160 / 507

- 160 -

4. Print

You can connect USB Memory to the printer and print saved data.

• Not all USB Memory is guaranteed to use. (USB Memory with security functions are not supported.)

• USB hubs and external USB HDDs are not supported.

• Encrypted PDF files are not supported.

• The following file systems are supported: FAT12, FAT16, FAT32.

• Supported file formats: PDF(v1.7), JPEG, PDF, TIFF(v6 baseline), XPS, PRN (PS, PCL, XPS)

• Up to 32 GB USB Memory is supported.

• Up to 100 files in supported file formats that are saved in USB Memory are displayed in the file list.

– If 100 or more files are saved in USB Memory, the file list is not displayed properly.

– USB Memory with a directory structure of 20 or more levels may not be read properly.

– A file path exceeding 240 characters may not be read correctly.

• You can print one file in USB Memory at a time.

Insert USB Memory into the USB port.

Press [Print] or the

(PRINT) button.

Press [Print From USB Memory].

Press [Select Print File].

Printing Data in USB Memory

Summary of Contents for MC573




























































































































































































































































































































































































































































































































Search results

Summary of Contents for MC573

Reviews:

Related manuals for MC573

Brands by name

Popular brands

Oki MC573, Advanced Manual

Search results

Summary of Contents for MC573

Reviews:

Related manuals for MC573

Brands by name

Popular brands