Oki MC573 Advanced Manual Download

Page: 61 / 507

- 61 -

2. Copy

You can stamp a date, sequential page numbers, or any character string when copying.

• Character strings are printed in black.

• The font Universe Medium is used for character strings.

Press [Copy] or the

(COPY) button.

Set a document in the ADF or on the document glass.

Press [Watermark] on the [Image Settings] tab.

Press [Page Number] to set the start page number and printing position.

Press [String] to specify the characters and printing position.

Press [Font Size] and specify character size.

Press the

(START) button.

This function enables you to copy both sides of an ID card, such as a driver's license, on one
side of a sheet of paper.

• You cannot use the ADF for this ID Card Copy function.

• Set the ID card with the upper side facing leftward.

• 2 mm from the edge of the document glass is the scan margin.

• The machine scans an area half the size of the specified paper. If the document is more than half the size of the paper

size, the excess part is discarded.

Press [Copy] or the

(COPY) button.

Press [ID Card Copy] on the [Advanced] tab.

[ID Card Copy] is set to [ON].

Pressing [ID Card Copy] switches between [ON] and [OFF].

Adding a Stamp (Watermark)

Copying Both Sides of a Card to One Side (ID Card Copy)

Summary of Contents for MC573




























































































































































































































































































































































































































































































































Search results

Summary of Contents for MC573

Reviews:

Related manuals for MC573

Brands by name

Popular brands

Oki MC573, Advanced Manual

Search results

Summary of Contents for MC573

Reviews:

Related manuals for MC573

Brands by name

Popular brands