background image

TROUBLESHOOTING FOR NETWORK CONNECTIONS

- 39 -

2

1

3

4

5

6

7

Fax transmission cannot be performed with a cover sheet

Problem description

In a N/W-Fax driver which is set to the IPP port, no cover sheet is output and an XL error occurs in the fax transmission when a printer 
driver whose file name consists of 54 letters or more is specified for the default printer and a Fax is sent with a cover sheet added 
from Microsoft Excel.

Corrective action

Set the file name of the printer driver in 30 letters or less.

Wireless LAN Problems

This section describes the troubleshooting for Wireless LAN.

Message

Corrective Action

Bad certificate

Unsupported certificate is installed. Reinstall the appropriate 
certificate. This equipment supports md5RSA and sha1RSA 
certificate only.

Bad record mac

SSL Key exchange failed. Turn the power OFF and then ON to 
restart the equipment.

Certificate expired

The certificate has been expired. Make sure that the time is set 
correctly or whether the certificate is expired.

Certificate revoke

The certificate has been revoked. Ask your network 
administrator.

Certificate unknown

The installed CA certificate cannot work as server certificate. 
Make sure to install a correct CA certificate.

Decompression failure

This equipment does not support the SSL compression. Please 
disable the SSL compression on the RADIUS server.

Handshake failure

Unsupported encryption may be set on the server. Make sure to 
use the supported encryption method.

Illegal parameter

Unsupported version of the TLS protocol may be used. Make 
sure to use the supported version of the TLS protocol.

No certificate

No certificate is installed or you do not specify the certificate file 
name. Make sure to install the certificate and specify the 
certificate file name correctly.

Peer error certificate

Installed CA certificate cannot verify the server certificate in the 
RADIUS server.
Make sure to install a correct CA certificate.

Peer error no certificate

The RADIUS server operates the communication with the 
certificate using the TLS protocol.

Peer no cipher

The RADIUS server requests the unsupported encryption for this 
equipment.

Peer error unsupported certificate type

This equipment uses the certificate that the RADIUS server does 
not support.

Peer unexpected message

The RADIUS server sends the message that is not TLS 
standard. Confirm the settings on the RADIUS server.

Unknown remote error type

The RADIUS server sends the alert message of illegal TLS.

Unsupported certificate

This equipment uses the certificate that the RADIUS server does 
not support.

Unknown ca

Installed CA certificate cannot verify the server certificate in the 
RADIUS server.
Make sure to install a correct CA certificate.

Unable to connect

Ask the administrator.

Summary of Contents for MC770x















































































Reviews: